Ground Loops and Drilling
Companies for ground loop heat pumps and the drilling they require, for new builds and renovations, wherever the permit allows it.
- 1
Fribourg · since 1987
e-therm AG of Fribourg drills and installs ground-source heat pump boreholes across all of Switzerland and calls itself the country's largest provider. The boreholes are built for a service life of around 50 years and can be used both for heating and for cooling. The company belongs to the Frutiger Group and runs a fleet of different drilling rigs. Advice is given in German and French.
- 2
Zufikon · since 2006
Grosser Spezialist mit 17 Bohrgeräten und über 18 Jahren Erfahrung
- 3
Düdingen
GEOTHERM AG, based in Düdingen with a second site in Bäch, has been drilling ground-source boreholes and building wells across Switzerland for around 30 years. By its own account it was the first Swiss drilling company to hold the FWS quality seal for geothermal boreholes. GEOTHERM belongs to KIBAG and plans complete installations including the heat pump. Advice and service are available in German and French.
- 4
Granges-près-Marnand
AGTAN SA is a family business in Granges-près-Marnand with a branch in Crans-Montana, covering the whole of French-speaking Switzerland. The company drills ground-source heat pump boreholes down to 300 meters and also takes on water wells, core drilling, and sonde sizing. Connecting the system to the building is part of the service too. Advice is given in French.
- 5
Sempach Station
Spezialisiert auf Erdsondenbohrungen für Ein- und Mehrfamilienhäuser, FWS-zertifiziert
- 6
Küttigen
Erdsondenbohrungen bis 400 Meter mit FWS-Zertifikat und modernem Bohrgerät
- 7
Dällikon, Kanton Zürich · since 2021
Bohrunternehmen aus Dällikon mit eigenem Maschinenpark, das sich auf Erdsondenbohrungen für die oberflächennahe Geothermie im Kanton Zürich spezialisiert hat.
- 8
Sargans
Über 40 Jahre in Erdsondenbohrungen mit internationaler Erfahrung, FWS-zertifiziert
- 9
NIBE offers a broad range of brine-water heat pumps for ground-source systems in Switzerland. The indoor units combine heat pump, hot water tank, and controls in a compact housing designed for straightforward installation.
- 10
Rickenbach
PBS Bohr AG of Rickenbach in the canton of Lucerne specializes in tapping geothermal heat and works across all of Switzerland. By its own account, the company has drilled over 5 million linear meters of boreholes, for single-family homes as well as mixed developments. Ground-source boreholes are used for both new builds and renovations, for heating and cooling. Advice is given in German.
- 11
Schwarzenbach
Über 30 Jahre Erfahrung in Erdwärmesondenbohrungen von Beratung bis Inbetriebnahme
- 12
Winterthur
Spezialisiert auf Geothermie-Bohrungen bis 350 Meter, FWS-zertifiziert
- 13
Rechthalten · since 2006
Seit 2006 Erdsondenbohrungen mit etwa 150 bis 200 neuen Systemen pro Jahr
- 14
Zizers · since 2009
Etablierte Firma mit 15+ Jahren Erfahrung in Bohrungen bis 400 Meter
- 15
Otelfingen
Seit über 35 Jahren mit der kleinsten Erdsondenbohranlage der Schweiz für enge Bauplätze
- 16
Gamsen
Erste Firma im Wallis mit FWS-Gütesiegel für hochwertige Erdwärmesonden-Bohrungen
- 17
St. Gallen
Tiefbau-Spezialist für Erdwärmesonden bis 350 Meter, FWS-zertifiziert
- 18
Altstätten · since 2006
Heim Bohrtechnik AG in Altstätten SG carries out ground-source borehole and well drilling, including in difficult ground conditions. Depending on the soil, the company uses hammer drilling in hard rock or flush drilling in sandy and clay layers. It has held the FWS quality seal continuously since 2006 and works in Germany and Austria as well as Switzerland. Communication is available in German, English, and Polish.
- 19
Wetzikon
Bohrungen bis 350 Meter mit FWS-Zertifikat und modernem Maschinenpark
- 20
Gettnau · since 2006
LSS Bohr AG of Gettnau in the canton of Lucerne carries out ground-source borehole and well drilling in the area between Lucerne and Bern. The company, with twelve staff and three drilling rigs, says it equips around 150 households with geothermal heat every year. Its services also include borehole extensions and frost-protection backfilling. Communication is in German.
- 21
Walterswil
Junge Firma in der Geothermie, Bohrungen bis 450 Meter Tiefe mit FWS-Gütesiegel
- 22
Wallisellen
GTB Erdsondenbohrungen AG, based in Wallisellen, specializes in ground-source borehole drilling in the cantons of Zurich, Thurgau, and St. Gallen. The company offers the full package, from planning through deep drilling to the house connection and excavation work. It is a member of the Swiss heat pump trade association and holds the current quality seal for drilling firms. Advice and execution are carried out in German.
- 23
Pratteln
Erdsonden Energie AG, with an office in Pratteln and a warehouse in Eiken, offers a full range of services around ground-source heat pump drilling. This includes site assessment, drilling, heat pump and borehole connection, distribution manifolds, core drilling, and excavation work. The company holds the FWS quality seal for drilling firms and operates as an independent energy service provider. Advice is given in German.
- 24
Rhäzüns
MR Erdwärme AG, based in Rhäzüns with a second site in Caslano in Ticino, drills ground-source boreholes in Graubünden, eastern Switzerland, and Ticino. The company works with several drilling teams and sums up its business simply as heat from the ground. Through its two locations it reaches both German-speaking Switzerland and Italian-speaking Ticino. Advice is given in German and Italian.
- 25
Wilen b. Wollerau
Moderner Spezialist für Geothermie-Bohrungen mit innovativem Ansatz
Frequently asked questions
Worauf sollte ich bei der Auswahl eines Bohrunternehmens für meine Erdsonden achten?
Achten Sie vor allem auf FWS-Zertifizierungen und die Erfahrung der Firma im Bereich der oberflächennahen Geothermie. Viele Anbieter decken verschiedene Tiefen ab, wobei Bohrungen oft bis zu 300 oder 400 Meter reichen können.
Bieten die Firmen auch die passende Wärmepumpe zum Erdsondensystem an?
Ja, es gibt spezialisierte Anbieter, die neben der Bohrtechnik auch passende Sole-Wasser-Wärmepumpen liefern. Diese Geräte kombinieren oft die Wärmepumpe, den Warmwasserspeicher und die Steuerung in einem kompakten Gehäuse.
Wie tief können Erdsonden in der Regel gebohrt werden?
Die Bohrtiefen variieren je nach Anbieter zwischen maximal 300 Metern und bis zu 400 Metern. Es lohnt sich daher, die maximale Tiefe der Firmen in Ihrer Region anzufragen.
Kann ich eine Erdsonden-Wärmepumpe auch bei einer Sanierung einbauen?
Ja, die Fachfirmen bieten Lösungen sowohl für den Neubau als auch für die Sanierung an. Das hängt allerdings immer davon ab, ob die örtlichen Bewilligungen dies zulassen.